![]() The PS4 gaming remote, when connected, slows or stops jogging through DF (controls are battling).This is more of a configuration thing than an issue with setup or software. Results in issues with jogging through keyframes – use of these is not recommended. Backlash compensation setting are sensitive to direction and sign.If you calibrate your lens differently on subsequent shoots, your recalled positions will be different.Set your Focus motor to 1, Iris motor to 2, Zoom motor to 3. Watch your motor numbers! Makes a difference on which axis is controller what!.Once limits are set for the lens, you can program from Dragonframe.If you want to limit below that, use the hand controller and Tilta Documentation to set your limits.If hard stops are good enough, use auto-calibrate for the motors. Set your limits on Tilta Motors before programming through Dragonframe.In other words, Tilta motors have 10,000 positions between stops to move the motor for your particular Focus, Zoom, or Iris's stops. They receive values from 0-9999 which is the relative position between their programmed stops. Tilta motors are different than our other motors. Notes for using Tilta Motors with Dragonframe: We recommend removing the axis you aren't using to keep your workspace clean (Brian's note - yes our SA2.6 is actually a nine axis controller - pretty cool, huh?).Make sure you are connected and then use the Jog buttons (blue arrows) to move the head around and ensure connectivity.When correctly imported your ARC MOTION CONTROL window will look similar to this. Select and import the recently downloaded ARCX file SA2_030624.arcx.Import the Arc Axis Setup by hitting the menu iconĪnd then selecting Import->Arc Axis Setup (arcx).The main reason for this file is to get the steps/deg/inch working correctly and the correct channels assigned. Click here to download the axis file or find it at the bottom of this article. arcx file with the default axis filed for the RS3 Pan/Tilt/Roll/Focus + Dana Dolly Slide(M1)/Turntable(M2) and the Tilta Nucleus Focus/Iris/Zoom. Import your axis Settings – for convenience, we have created an SA2.6.In Dragonframe, from the top menu, select Window -> ARC MOTION CONTROL.Your SA2.6'screen will change to one that looks similar to this.Close out of this window by clicking OK.The Status should read: Connected to eMotimo SA2 - V1(1.7.0) these numbers will vary with firmwares. ![]() Within 3 seconds it should say connected and turn green.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |